Re: Need to start VMware vCloud as Provider
Do your vSphere installation first. Make sure that all SSL certificates are correct, and DNS and all that good stuff is done first. Have a separate cluster for your Management systems...
View ArticleRe: Nested ESXi 5.1 Duplicate ICMP Response
What subnet mask do you use for the 172.16.x.x networks? André
View ArticleRe: How can i sort VM's by high i/o in vSphere ?
This is something we've struggled with also. My company is looking at Veeam One to be able to report on things like this.
View ArticleRe: Nested ESXi 5.1 Duplicate ICMP Response
172.16.10.0/24 for MGMT172.16.20.0/24 for STOR
View ArticleRe: Nested ESXi 5.1 Duplicate ICMP Response
After changing both pESXi and vESXi vSwitch to default setting, the duplicate ICMP response between pESXi and vESXi be solved. But when I try to ping between vESXi, the duplicate ICMP response occur....
View ArticleClik here to view.
Re: VM loses connectivity after vMotion to another host in cluster
Here are screenshots from CDP, hopefully this provides more information:
View ArticleClik here to view.
vmk0 in different subnet than vmnic it is attached to on dvSwitch yet it...
I noticed that one of my hosts vmk0 IP is in the 192.168.200.x subnet but it is in a port group that is connected to a vmnic that is connected to a switch in the .111 subnet.(see observed networks) I...
View ArticleRe: Cannot sort custom object
We are trying to sort the objects in the inventory list by clicking the column. With our plugin, we are able to show more custom objects besides "host", "cluster" etc. We didn't write specific code for...
View ArticleRe: Nested ESXi 5.1 Duplicate ICMP Response
Can you please temporarily disconnect one of the vSwitch0 uplinks for each of the vHosts to see whether this makes a difference? André
View ArticleRe: Need help creating a dashboard to count a total.
Hi Hankg-ger, can you export out that dashboard so I can import it into mine? Also for your Generic Scoreboard how did you get it to include all VM's but only display the top 20 into the list? Thanks
View ArticleRe: 10GB ethernet - NIC recommendations
We currently use the Intel X520-2 Adapters in our hosts. Intel® Ethernet Converged Network Adapter X520 Product Family As for setup, we use A, Mgmt and Guest traffic on the two 10GbE uplinks. We use...
View ArticleClik here to view.
Re: vCO Port Issue when connecting to vCenter
The version/build of vCenter is 5.1.0 Build 1123961. I have tried a local admin, and since it's SSO I also tested admin@System-Domain (after granting it proper permissions in vCenter) both with...
View ArticleRe: Mixing Management and Backup traffic
If you only have one IP on your NFS target then traffic will only be able to flow through one physical uplink at any given point in time, so two teamed NICs are sufficient.OK - so I will have two...
View ArticleRe: Could not power on VM : Invalid metadata - storage
Is this is the only VM from that datastore facing this issue? Or multiple VMs? Also try to create a file inside the VM folder and see if that allow you to create files. If this is a Metadata corruption...
View ArticleClik here to view.
Re: Nested ESXi 5.1 Duplicate ICMP Response
Both vESXi-01 and vESXi-02 have changed to x1 uplink as below, but the duplicate ICMP issue still exist.
View ArticleRe: Console Blank (disconnected)
902 and 903 are not required externally, only from vCD cell to ESXi. TCP 443 to the console proxy address is needed. If you are not on 5.1.2, can you upgrade to vCloud Director 5.1.2? Also, check...
View ArticleRe: ESXi 5.0 and MSCS (Microsoft Failover Clustering) on iSCSI SAN
Offically VMware don't support MSCS on iSCSI SAN but you can use it. 2 VM's running on the same ESXI 5.0 host. > Since your running both VM's on same host its CIB config (Cluster in Box), where...
View ArticleRe: Nested ESXi 5.1 Duplicate ICMP Response
"10000 Full"!? Which virtual adapter do you use? Not sure whether this causes the issue, but afaik only the E1000 adapter is supported for virtual ESXi hosts. André
View ArticleRe: ESXi 5.0 and MSCS (Microsoft Failover Clustering) on iSCSI SAN
refer to this http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-mscs-guide.pdf...
View ArticleUnable to start the UI on ESXi5
Hi Everybody, This is Sankar From India. We have installed VMware ESXi 5 on Dell Poweredge 820. I am unable to open the UI and its showing 503 error.I have enabled the ssh and shell access.I didn't...
View Article