Re: SRM 5.8 stating "No SRAs have been installed."
Hi, problem solved.After upgrade, there were 2 tablespaces on SRM BD (permissions) that did not have the users. Then some troubleshooting, and research I was able to find a solution for my case.This is...
View ArticleRe: ESxi 5.5 U2 + W7000 @ vsga FAIL
A few things to start with. 1.Your host is not supported, the only supported host according to AMD is the Dell R720 That does not mean it should not work but you will not be able to get support...
View ArticleRe: ESxi 5.5 U2 + W7000 @ vsga FAIL
Hi Linjo,thank you very much for your quick reply! You are totally right, I try to use vsga with horizon view.I'll try the newer driver and report back.
View ArticleRe: Can't add ESX 6.0 host to vCenter 6.0 Server
Did you try telnet the hosts from the vcenter over port 443 and also try openssl to check the SSL connection
View ArticleRe: LAB - vCenter 6 and Platform Services controller with 3 ESXi 6.0 hosts
Also, I tried following this blog...VMware Certificate Authority overview and using VMCA Root Certificates in a browser | VMware vSphere Blog - VMware Blogs ....and I got to the point where it says go...
View ArticleSearchIndex.FindByIP() for VM with multiple vNics
If a VM has multiple vNics and each vNic has its own IP address, can SearchIndex.FindByIp() supportVM look up based on any of the VM's interface's IP address, or the API only supports VM look up...
View ArticleRe: Can't add ESX 6.0 host to vCenter 6.0 Server
Telnet connects and my cursor goes to the top left and blonks? Good? Bad? I'm not sure......lol I don't quite understand how to "try openssl to check the SSL connection".Can you elaborate? Thanks
View ArticleLAB - vCenter 6 and Platform Services controller with 3 ESXi 6.0 hosts
OK, I blew out my initial test lab of 6.0 to restart. I have a VM for Platform Services Controller and vCenter Server and both are 6.0 on Windows Server 2012.My esx hosts are all 6.0 as well.I created...
View ArticleRe: Can't add ESX 6.0 host to vCenter 6.0 Server
Yes telnet is good and connected to 443. I have installed openssl and from the command prompt I ran the following commands to check the SSL certificate on the other machine. openssl s_client -connect...
View ArticleAvoiding mouse grab with text console
Most of the systems I have running under VMware have text consoles with no mouse capabilities at all. When using the console via VMware, in order to type into the console, VMware grabs the mouse and...
View ArticleRe: License Cost Question
This one comes up a lot: StarWind Software – StarWind Virtual SAN® – Starwindsoftware.com I have no experience with it and have done no research on the product. But I do believe it has a 2 host...
View ArticleRe: HA in VSAN Advantages
The same advantage you would have with any shared storage. In the event of a host crash, VMs can be started on another host. Thank you, Zach.
View ArticleRe: Can't add ESX 6.0 host to vCenter 6.0 Server
I ran those commands on both the platform controller and the vcenter and I get outputs like below.... WARNING: can't open config file: /usr/local/ssl/openssl.cnfLoading 'screen' into random state -...
View ArticleRe: Can't add ESX 6.0 host to vCenter 6.0 Server
I compared the vcenter certificate with ours and it looks same. Can you paste the output when you connected to the ESXi host also.
View ArticleRe: Auto Deploy and VCD Network Isolation - Not Working
VCDNI is a MAC-MAC encapsulation technology.For the same reason MTU should be increased MTU Increase (24Bytes, 1500 –> 1524).Increase the MTU size of network devices in the transport VLAN to at...
View ArticleRe: What's the easiest virtual storage appliance to use to try/test vSphere...
I personally like the Starwind for the storage virtualization purpose in my lab. its really easy to use and understand. Also you can use the openfiler as its a complete appliance instead starwind which...
View ArticleClik here to view.
Re: Moving from Hyper-V - conversion issues
We'll fix it with the next update. I mean there would be an ability to convert into growable and compressed VMDKs --So I google and found a way to convert VM's with a tool Starwind V2V everything...
View ArticleRe: Trying to run VMware 10.0.0.1 from External HHD on a different computer
Your post does not say wether you installed VMware Workstation to a custom path - using the external HD - or if you just store your Workstation documents (VMs) on the external disk.The second one...
View ArticleRe: Cannot Complete Customization
Worked on this for 3 days before finding this post. Thank you so much. I can stop with the head/wall bashing.
View ArticleClik here to view.
Re: windows 10 - nested with Hyper-V network issue
I believe my setup is the same as yours: However, I do not have any connectivity problems at reboot, nor do I get a flood of event 25 messages in my event logs: Is there any more information you can...
View Article