Quantcast
Channel: VMware Communities: Message List
Viewing all articles
Browse latest Browse all 231085

Re: Dell PERC 6/i not showing up?

$
0
0

I ran the command and got this back:

 

/tmp/drivers # esxcli software vib install -v /tmp/drivers/scsi-megaraid-sas-06.

803.52.00-1vmw.550.0.0.1331820.x86_64.vib

Installation Result

   Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

   Reboot Required: true

   VIBs Installed: VMware_bootbank_scsi-megaraid-sas_06.803.52.00-1vmw.550.0.0.1331820

   VIBs Removed: VMware_bootbank_scsi-megaraid-sas_5.34-9vmw.550.2.33.2068190

   VIBs Skipped:

 

All looking ok, but after reboot there wasn't any difference it still doesn't show up in storage adapters, I'm still thinking this is an issue in the bios. Or could it be I have a raid card that the bios works and is able to raid, but is broken and can't talk to an OS? before I setup esxi I setup the bios as optimal defaults, the only think I changed was turning off the Sata to IDE emulation and change the SATA mode from native IDE to RAID (dothill) but that was all for the internal controller that should have nothing to do with the dell card right?


Viewing all articles
Browse latest Browse all 231085

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>